How to Make a Origami Lotus Flower Youtube

Download Article

Download Article

With a piece of paper and some clever folding, you can make a delicate origami lotus flower. This guide will help you get on your way by teaching you how to construct the "blintz fold:" the foundation for many popular origami projects, including the lotus flower. This guide will then teach how take that blintz base into full blossom! After a bit of practice, try experimenting with different shapes, sizes, and textures of paper to see what you can produce. With a little patience and a keen eye for detail, you will soon be impressing your friends.

1. 

   1

   Create guidelines by folding a square piece of paper in half. Line-up the edges and corners and make a solid crease.^[1]

2. 

   2

   Unfold and repeat in the other direction. Be sure to line-up the edges and corners as cleanly as you possibly can.^[2]

   Advertisement

3. 

   3

   Unfold. You should now have a square piece of paper with creases/guidelines that intersect perpendicularly in the center.^[3]

4. 

   4

   Fold each corner inward toward the center. Begin with one corner, pulling it all the way toward the center point and lining it up with the guideline-creases you made earlier. Once everything is lined up, fold and crease.

   • Try to get the tip as close to center without going past it.
   • Do not unfold.

5. 

   5

   Repeat the previous step for each corner. Once each corner is folded you should be left a smaller square. This is a "blintz fold."^[4]

   • The "blintz fold" is the foundation for many origami projects.

   Advertisement

1. 

   1

   Fold each corner of the blintz base inward toward the center. Bring each corner all the way to the center point of the square, and line-up the corners, edges and guidelines just as you did when you first constructed the base.^[5]

   • Make sure the folds are on the top of the blintz base when you begin.

2. 

   2

   Repeat for each corner. When you are finished, you should end-up with another square.

   • You are essentially performing a series of blintz folds on a single piece of paper.

3. 

   3

   Make another blintz fold. As you did with the previous step, fold each corner of the paper inward toward the center, lining up all edges and corners.

   • Work each corner one at a time and be patient.

4. 

   4

   Flip the square over and make another blintz fold. Once again, you will be folding the corners to the center point so that you are left with yet another, albeit smaller, square.^[6]

   • At this point, the paper may be very difficult to fold.

5. 

   5

   Make the final folds. This time you will only be folding a portion of the corners inward. Make a fold that includes approximately 10-20 percent of the corner.

6. 

   6

   Repeat for each corner. The object should know resemble an octagon with irregular sides.

7. 

   7

   Pull up your first petals. Keeping the object oriented so that you can see your most recent folds, feel around the bottom of the square for the top layer of flaps. Gently pull-up each flap one at a time, working around the smaller partial folds you made in steps five and six. Repeat for each flap/petal.^[7]

   • You will be "inverting" a fold with each petal. This is the hardest part of the process.
   • Move slowly and gently, and try not to tear the paper.
   • You may have to slightly "unfold" the lotus to get the petals to come up. When you're finished, the flap you grabbed from the bottom should be nearly vertical.

8. 

   8

   Pull up the next round of petals. Again, grab the flaps on the bottom and gently lift them up, "inverting" the fold so that they petals open on the opposite side.

9. 

   9

   Pull up the last round of petals. Grab the remaining flaps on the bottom and gently fold them upward. These petals will be closer to horizontal than vertical, and they might be the most difficult ones to fold without tearing.

   Advertisement

Add New Question

• Question

  If I need a bigger lotus, what size of paper will I use?

  

  It really depends on how big the lotus needs to be. But, as long as it's in the shape of a square, it's okay to use any size paper.

• Question

  Which way would I do one-sided colored paper?

  

  The colored side should be facing down, so when you make the very first folds, the color side should be visible.

• Question

  Why do the lotus flowers need to open?

  

  When the lotus flowers open, they will look more elegant and full.

• Question

  Is A4 sized paper easy to use?

  

  Yes it can work but remember to cut it so that it is square.

• Question

  Does it have to be a certain color?

  

  No. The color is up to you.

• Question

  What do I do if I don't have scissors to cut it into a square?

  

  Mrs.Spooks

  Community Answer

  Fold the top-right corner down to the side of the paper. Then fold the excess paper back and forth until the edge is smooth and crisp. You should be able to rip it along the edge at that point.

• Question

  What size paper would be the best?

  

  A good size for paper would be 9 in. x 9 in, so that it isn't too difficult to fold as you get into the thicker layers.

• Question

  How do I keep the paper from ripping?

  

  You just have to be very gentle when pulling or folding or you could just use a bigger piece of paper.

• Question

  If the paper tears, will the flower come apart?

  

  It won't come apart, but there will be a visible rip. It is fine to use a bit of tape to fix it.

• Question

  Is only glossy paper needed?

  

  No, any paper is fine to use, as long as it is square it will work.

See more answers

Ask a Question

200 characters left

Include your email address to get a message when this question is answered.

Submit

Advertisement

• Its easier to make a large lotus than a small one. Starting with a larger square of paper makes the final folds less delicate.

• Be patient. Crease your folds carefully, and expect to try a few lotuses before you get the technique down.

• Try it in different colors and sizes, but don't make it too small.

• Give the lotus to someone for a simple, yet sweet gift.

Thanks for submitting a tip for review!

Advertisement

About This Article

Article SummaryX

To make a simple origami lotus flower, you'll just need one piece of square paper. First, construct the blintz fold, which is the foundation for many popular origami projects. To do the blintz fold, fold the piece of paper in half diagonally from both directions. Then, unfold the paper and fold each corner into the center. Once you've made the blintz base, fold each corner of the base inward to the center. Make another blintz fold next to construct an even smaller square. Then, turn the square over and make a third blintz fold on the other side. Gently fold each corner of the square inward so the shape looks like an irregular octagon. To finish the flower, pull up each layer of flaps to create the petals. For more tips on making a simple origami lotus flower, like how to pull up the last round of petals, read on!

Did this summary help you?

Thanks to all authors for creating a page that has been read 881,971 times.

Did this article help you?

How to Make a Origami Lotus Flower Youtube

Source: https://www.wikihow.com/Make-a-Simple-Origami-Lotus-Flower

Share this post